Fix Machine Error 77 Brother MFC-8500 and Intellifax 4100

You can Fix machine error 77 Brother MFC-8500, follow this step:

Power off the printer for 15 minutes and power back on again. If that fixes the problem then OK.
If not then go into maintenance mode –
Press and hold the menu/set key while turning on the machine. Wait until it comes completely up before releasing. It should say Maintenance in the display.

If not press function,*,2,8,6,4 within two seconds. It should say maintenance in the display. Or on some machines Menu,*,2,8,6,4 within 2 seconds.

Once you get it into maintenance hit 91 to do a parameter reset and than 99 to get out of maintenance.

If this corrects the problem then OK but you may have a failing thermister in the fuser.
If the problem happens again then change the thermister.

If the reset does not work then either the thermister or the fuser lamp has failed. In rare cases there is a poor connection with the cables to the fuser.

You will have to reset the parameter again after replacing the fuser if you need to replace the fuser or repair it.

For Intellifax 4100 fixing Error 77 Message:

1) Unplug machine.
2) Hold down menu key. Plug in machine.
3) Release menu key.
4) Enter 91
5) Enter 99
6) Machine will warm up.
7) Press Reports key, then 1. This will test if the machine can
print.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: